This gas discharge tube lightning suppressor features wide-band operation from DC up to 6 GHz with low RF insertion loss, making it ideal for the newer "5G" 802.11ac Wi-Fi and other high-frequency band services such as 3.5 GHz WLL and UNII / ISM applications in the 5.2 - 5.8 GHz bands. Of course it is also a great lightning protection solution for 2G, 3G, 4G, and LTE service as well as 2.4 GHz Wi-Fi, Ham radio and other lower frequency applications.
Coaxial lightning suppressors are designed to be installed between outdoor antennas and sensitive radio equipment to protect equipment, structures and personnel from high-energy electrical pulses carried through the coax cable either from a direct lightning strike or induced by a nearby strike. Arresters should be installed as close a possible to the equipment to be protected, often at the point where the coax cable enters the building. They can also be installed near the antenna for additional protection.
This model features N-Male and N-Female Bulkhead connectors with a rubber O-ring seal for mounting through an enclosure wall or the arrestor can be used inline. This protector will pass DC, so it is suitable for applications where DC is carried through the coax cable, such as remote amplifiers and LNAs. Both connector ports of this unit are equally protected -- it can be installed in either orientation. A ground lug and terminal on the housing provide superior grounding.
3G/4G mobile router compatible - Approved for the Proxicast LAN-Cell router.
Part #: ANT-212-001
Product Note: The Lightning Surge Protectors listed on this page may also be referred to as: lightning suppressor, transient protector, spike arrestor, surge arrestor, lightning arrestor, spike protector, surge protector, lightning protector, spike suppressor, rf protector. Spelling of these products may also vary depending on location such as: lightning surge protecter, rf protecter, lightning suppresser, spike suppresser, spike arrester, surge arrester, and lightning arrester.
|Frequency Range||0 - 6 GHz|
|Discharge Voltage||DC 230V|
|Max Power||200 Wi|
|Insertion Loss||< 0.2 dB|
|VSWR||ADGP < 1.2|
|Material||Connector Body: Nickel Plated Brass
Pins: Gold Plated Brass
|Connectors||N-Male & N-Female Bulk Head
|Dimensions||2.65 in x 0.98 in (67.5 mm x 24.8 mm)|
|Weight||4.9 oz (140 g)|