If you are powering the LAN-Cell 3G/4G Cellular Router from a vehicle, marine, solar, battery, generator or other direct DC power source, the interVOLT PWR-SVS-1212050 is the perfect companion product to ensure that the LAN-Cell receives clean, stable power.
The new interVOLT SVS is so much more than a mere voltage regulator.
In short, the SVS is a power conditioning device without the galvanic isolation. If you don’t require DC-DC isolation then the SVS is the cost effective solution for your application. The SVS is excellent value-for-money when the performance and specification is compared with similar products in the market.
The SVS1212050 is specifically designed to address the many issues associated with DC power sources including voltage surges, transients, noise, spikes, shorts, over-loads, high-temperatures, etc.
With digital over analogue control the interVOLT SVS series is second-to-none in terms of performance with a high specification in a compact device. It incorporates diagnostics with LED status indication to assist the installer/operator in identifying and troubleshoot issues should they arise. The SVS also boasts automatic features that protect both the device and the equipment connected.
Our new mounting plate design does not increase the footprint which allows the device to be installed in areas such as under dash, under seat, in electrical enclosures, etc, anywhere space is limited.
Innovative features. Rugged design. Simple installation. Peace-of-Mind.
High visibility LED status display indicators
Excellent line and load regulation characteristics
Highly stable under a range of input conditions
Suitable for high temperature environments
Compact in size with unique mounting facility
Corrosion resistant construction and hardware
Conformally coated printed circuit board
Manufacturer’s 24 month warranty (conditional)
Part Number: PWR-SVS-1212050
|Input Voltage Range||8 – 16VDC|
|Output Voltage||12.5 VDC (+/- 1%)|
|Length Overall||101mm (3.98”)|
|Width Overall||62mm (2.44”)|
|Height Overall||34mm (1.34”)|
|Continuous Load Rating||5 Amps|
|Standby Current Draw||<70mA|
|Power Conversion Efficiency @ 25°C||93%|
|Output Ripple||Less than 10mV Peak to Peak|
|Operating Temperature||-25°C to + 50°C|
|Operating Humidity||Ideally less than 95%|
|Enclosure Material||ABS/PC alloy and 6063-T5 anodised aluminium|
|Diagnostic Indicator||4 LEDs – monitoring output status, low voltage, high temperature, overload/short-circuit.|
|Transient Voltage Protection||Filtering – Purpose designed circuit|
|Overload/Short Circuit Protection||Shutdown – Current sensing circuit (automatic reset)|
|Input Under Voltage Protection||Shutdown – Voltage sensing circuit (automatic reset)|
|Over Temperature Protection||Shutdown – Temperature sensing circuit (automatic reset)|
|Termination||Power – M3 screw terminal|
|Conformity||EMC – AS/NZS CISP 11 and EN55011. Australian C Tick and European CE mark.|